Adlink nanoX-BT Manuel d'utilisateur Page 48

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 71
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 47
Page 48 nanoX-BT
7.3.7.1. PCI and PCIe > PCIe Configuration
Feature Options Description
PCIe Configuration Info only
PCI Express Root Port x Submenu
7.3.7.2. PCI and PCIe > PCIe Configuration > PCI Express Port x
Feature Options Description
PCI Express Port x Enabled
Disabled
Enable or disable the PCI Express port x in the chipset.
ASPM Auto PCI Express Active State Power Management settings.
URR Disabled
Enabled
Enable or disable PCI Express Unsupported Request Reporting.
FER Disabled
Enabled
Enable or disable PCI Express Device Fatal Error Reporting.
NFER Disabled
Enabled
Enable or disable PCI Express Device Non-Fatal Error
Reporting.
CER Disabled
Enabled
Enable or disable PCI Express Device Correctable Error
Reporting.
SEFE Disabled
Enabled
Enable or disable Root PCI Express System Error on Fatal
Error.
SENFE Disabled
Enabled
Enable or disable Root PCI Express System Error on Non-Fatal
Error.
SECE Disabled
Enabled
Enable or disable Root PCI Express System Error on
Correctable Error.
PME SCI Disabled
Enabled
Enable or disable PCI Express PME SCI.
Hot Plug Disabled
Enabled
Enable or disable PCI Express hotplug.
Speed Auto
Gen 2
Gen 1
Configure PCIe port speed.
7.3.8. Super IO
Feature Options Description
Super IO Chip Info only
W83627DHG Super IO Configuration Info only
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Enabled
Disabled
IO=3F8h; IRQ=4
Auto
IO=3F8h; IRQ=4
IO=3F8h; IRQ=3,4,5,6,7,10,11,12
IO=2F8h; IRQ=3,4,5,6,7,10,11,12
IO=3E8h; IRQ=3,4,5,6,7,10,11,12
IO=2E8h; IRQ=3,4,5,6,7,10,11,12
Enable/Disable Serial Port 1 (COM0).
Fixed configuration of serial port.
Select an optimal setting for Super IO device.
Vue de la page 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 70 71

Commentaires sur ces manuels

Pas de commentaire