Adlink nanoX-BT Manuel d'utilisateur télécharger pdf (Page 25)

nanoX-BT Page 25

3.3.19.

Power and Ground

Signal Pin # Description I/O PU/PD Comment

VCC_12V A104-A109

B104-B109

Primary power input: +12V nominal

See section 7 “Electrical Specifications“ for allowable input range. All

available VCC_12V pins on the connector(s) shall be used.

P 5~14 V

VCC_5V_SBY B84-B87 Standby power input: +5.0V nominal. See section 7 “Electrical

Specifications“ for allowable input range. If VCC5_SBY is used, all

available VCC_5V_SBY pins on the connector(s) shall be used. Only

used for standby and suspend functions. May be left unconnected if

these functions are not used in the system design.

P 5Vsb

±5%

VCC_RTC A47 Real-time clock circuit-power input. Nominally +3.0V. P

GND A1, A11, A21, A31, A41, A51,

A57, A66, A80, A90, A96,

A100, A110, B1, B11,

B21 ,B31, B41, B51, B60, B70,

B80, B90, B100, B110

Ground - DC power and signal and AC signal return path. P

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 70 71

Pas de commentaire

Adlink nanoX-BT Manuel d'utilisateur Page 25