Adlink CSA-5100 Manuel d'utilisateur Page 1

CSA-5100 1U Rackmount Network Appliance with Intel® Xeon® Processor E3-1200 v3 Family User’s Manual Manual Revision:

10 CSA-51001.5 Package Contents Before opening, please check the shipping carton for any damage. If the shipping carton and contents are damaged, n

11 CSA-51002 Specifications 2.1 CSA-5100 Specifications Main System CPU Intel® Xeon® E3-1275 v3 (4C/8T) Intel® Xeon® E3-1225 v3 (4C/4T) Intel® Co

12 CSA-5100Mechanical & Environmental Form Factor 19” 1U rackmount 440mm x 44mm x 440 mm (W x H x D) Fans 4x fans speed adjustable Able to operat

13 CSA-51003 Getting Started 3.1 Removing the Chassis Lid 1. Remove the four screws securing each side of the lid to the chassis. 2. Remove the

14 CSA-51004. Carefully place the CPU into the socket, making sure the socket notches align with the processor notches and the alignment triangle on

15 CSA-5100 6. Make sure there is sufficient thermal paste on of the heatsink and place it on the CPU with the cooling fins aligned with the DIMM sl

16 CSA-5100 3.3 Installing a 2.5" SATA Drive 1. Loosen the 4 screws securing the drive bracket to the chassis shown below and lift the bracket

17 CSA-51003. Secure the 2.5" SATA drive to the bracket with four screws. 4. Install the drive/bracket assembly to the chassis, making sur

18 CSA-5100 5. Secure the two screws on the side of the chassis as shown below.

19 CSA-51003.4 Installing a Network Interface Module 1. Loosen the two screws on the Network Interface Module (NIM) faceplate, and pull outwards on

2 CSA-5100Revision History Revision Release Date Description of Change(s) 1.00 18/08/2014 Initial release 1.01 25/11/2014 Remove CSA-5200; add F

20 CSA-51003. Insert the NIM into the slot. 4. Secure the NIM with the two screws removed in Step 1.

21 CSA-51003.5 Driver Installation The CSA-5100 drivers are available from the ADLINK All-In-One DVD at X:\CSA-5200\, or from the ADLINK website at:

22 CSA-51004 System Interfaces 4.1 Front Panel I/O 4.1.1 Status LEDs Power LED Green: Power On Bypass Status LED Red: Bypass; Off: No Bypass H

23 CSA-51004.1.3 Service Port Status LEDs LAN LED Status LED Color 10 Mbps Off Left 100 Mbps GREEN 1000 Mbps Yellow GbE Right Right LINK wit

24 CSA-51004.2 Board Layout 16234 577891011 11 11 11 Location Description Location Description 1 PCIe x4 connector (PCIE1) 7 mSATA connectors (CN

25 CSA-51004.3 Connectors and Jumpers 4.3.1 PCIe x4 Connector (PCIE1) Pin Signal Pin Signal A1 PRSNT1# B1 +12V A2 +12V B2 +12V A3 +12V B3 +12V

26 CSA-51004.3.2 CFast Connector (CN17) Pin Signal S1 GND S2 CF_TX_DP S3 CF_TX_DN S4 GND S5 CF_RX_DN S6 CF_RX_DP S7 GND P1 CFast_CDI P2 GND P3 NC P

27 CSA-51004.3.4 ATX12V Connector (CN24) Pin Signal 1-4 GND 5-8 P12V_CORE 4.3.5 Fan Connectors (FAN1/FAN6-9) Pin Signal 1 FAN_CTL 2 FAN_TAC

28 CSA-51004.3.7 mSATA Connectors (CN9/CN48) Pin Signal Pin Signal 1 NC 2 P3V3 3 NC 4 GND 5 NC 6 P1V5 7 NC 8 NC 9 GND 10 NC 11 NC 12 NC 1

29 CSA-51004.3.9 SATADOM Power Connector (CN18, Wafer 1.25mm pitch) Pin Signal 1 Ground 2 TXP 3 TXN 4 Ground 4.3.10 Clear CMOS Jumper (JBAT1)

3 CSA-5100Table of Contents Revision History ...

30 CSA-5100 Pin Signal Pin Signal A29 PCIE-RXP3 B29 GND A30 PCIE-RXN3 B30 NC A31 GND B31 NC A32 NC B32 GND A33 NC B33 PCIE-TXP4 A34 GND B34 P

31 CSA-51005 LAN Bypass Function The CSA-5100 is equipped with a LAN Bypass function to allow uninterrupted network traffic in the case of power disr

32 CSA-5100 CSA-Z8X10 LAN Bypass Port Pairing LAN Bypass Pair 1: LAN1 & LAN2 LAN Bypass Pair 2: LAN3 & LAN4 LAN Bypass Pair 3: LAN5 &am

33 CSA-5100 5.3 SuperIO Watchdog Driver & API A SuperIO Watchdog Driver and API (Linux only) is available to enable LAN bypass by software co

34 CSA-5100BYPASS_BTN#WDOG_REESTLAN_BYPASS_LED#Watchdog(ITE IT8786)LPCBYPASS_LAN# Active LowNetwork ControllerLAN INLAN OUTPCHHaswell CPUCSA-5200(Imp

35 CSA-51006 Watchdog Timer Programming Some applications require a server to intelligently switch the LAN bypass mode off and on. ADLINK has develop

36 CSA-51006.2 Deliverables The CSA-5100 SuperIO Watchdog Software deliver package (SuperIO_WDT-x.x.x.tar.gz) provides the following software compon

37 CSA-5100PROTOTYPE static ssize_t write(struct file *file, const char __user *data,size_t len, loff_t *ppos) DESCRIPTION This function is used to

38 CSA-5100DESCRIPTION This function defines functions for the watchdog device according to the available features. int ioctl(int handle, int cmd,[in

39 CSA-5100 * the Watchdog to reset its internal timer so it doesn't trigger * a computer reset. */ static void keep_alive(void) { int dummy;

4 CSA-5100 6 Watchdog Timer Programming ... 35 6.1 Architecture Ov

40 CSA-5100 { flags = WDIOS_DISABLECARD; ioctl(fd, WDIOC_SETOPTIONS, &flags); fprintf(stderr, "Watchdog card disabled.\n"

41 CSA-51007 BIOS Setup The following chapter describes basic navigation for the CSA-5100 BIOS setup utility. 7.1 Entering BIOS Setup To enter the

42 CSA-51007.2 Setup Menu The Main BIOS setup menu is the first screen that you can navigate to. The Main BIOS setup menu screen has two main frames.

43 CSA-5100 →← Left/Right. The Left and Right < Arrow > keys allow you to select a setup screen. For example: Main screen, Advanced screen,

44 CSA-5100 F3 The < F3 > key on your keyboard is the optimized defaults key. To set the optimized defaults settings of the BIOS, press the &

45 CSA-51007.4 Main Setup When you first enter the Setup Utility, you will find the Main setup screen. You can always return to the Main setup screen

46 CSA-5100 7.4.2 System Date/System Time Use this option to change the system time and date. Highlight System Time or System Date using the < Ar

47 CSA-51007.5.1 ACPI Settings You can use this screen to select options for the ACPI Advanced Configuration Settings. Use the up and down < Arro

48 CSA-5100 Hyper-threading Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimi

49 CSA-5100 7.5.3 SATA Configuration You can use this screen to select options for the SATA Configuration Settings. An example of the SATA Configura

5 CSA-5100 1 Overview 1.1 Introduction The ADLINK CSA-5100 is a 1U 19" rackmount Network Appliance with 4th Generation Intel® processor Xeon® E

50 CSA-5100 7.5.4 PCH-FW Configuration You can use this screen to check Intel Management Engine (ME) firmware status. The information is described o

51 CSA-5100Legacy USB Support Enables legacy USB support. Auto option disables legacy support if no USB devices are connected. The disable option wil

52 CSA-51007.5.7 IT8786 HW Monitor You can use this screen to check PC health status. The information will be described on the following pages.

53 CSA-51005V Displays current system 5V voltage. 12V Displays current system 12V voltage. 7.5.8 Smart Fan Function You can use this screen to sel

54 CSA-5100PWM-Plus start temperature limit FAN will start addition RPM, when temperature is higher than this limit. Fan full temperature limit Fan w

55 CSA-5100Console Redirection The BIOS Console Redirection feature is here. Set this value to Enabled/Disabled. Console Redirection Settings The set

56 CSA-5100Stop Bits Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. C

57 CSA-51007.6 Chipset Setup Select the Chipset tab from the setup screen to enter the Chipset BIOS Setup screen. You can select any of Chipset BIOS

58 CSA-51007.6.1.1 PCI Express Configuration PCI Express Root Port 3,4,5 Control the PCI Express Root Port of 3-5. Set this value to Enable / Dis

59 CSA-51007.6.2 System Agent (SA) Configuration VT-d The Intel Virtualization Technology for Directed I/O. Set this value to Enabled/Disabled.

6 CSA-51001.2 Block Diagram Intel®Xeon® E3-1200 v3Intel PCHC226DMI 2.0 x4SATA x4SPIto NIM slotsBIOSGPIOUDIMMDDR3 1600MHzNIM slot (PCIe x8, GPIO)S

60 CSA-51007.6.2.1 Graphics Configuration Primary Display Select which of IGFX/PEG/ PCIE graphics device should be the primary display. Set this va

61 CSA-5100 DVMT Total Gfx Memory Select DVMT 5.0 total graphic memory size used by the internal graphics device. Configuration options are as seen o

62 CSA-51007.7 Boot Setup Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You can select any of the items in the left

63 CSA-5100Hard Drive BBS Priorities Specifies the boot device priority sequence from available hard drives. CSM16 Parameters You can use this screen

64 CSA-5100Administrator / User Password If only the administrator’s password is set, then this limits access to setup and is only asked for when en

65 CSA-5100Discard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes

66 CSA-5100Restore Defaults Restore/Load Defaults values for all the setup options. Save as User Defaults Save the changes done so far as user defa

67 CSA-5100Safety Instructions For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on t

68 CSA-5100Consignes de Sécurité Importantes Pour assurer la sécurité de l’utilisateur, veuillez lire et suivre toutes les directives, ainsi que les

69 CSA-5100Getting Service Contact us should you require any service or assistance. ADLINK Technology, Inc. Address: 9F, No.166 Jian Yi Road, Zh

7 CSA-51001.3 Mechanical Overview 1.3.1 Front Panel 1.3.2 Rear Panel

70 CSA-5100 ADLINK Technology, Inc. (French Liaison Office) Address: 6 allée de Londres, Immeuble Ceylan 91940 Les Ulis, France Tel: +33 (0) 1

8 CSA-51001.3.3 Chassis Layout CFast Power SupplySATADrive Bay mSATA DDR3 DIMMs x4SATAConnectorsFans SATADOMPower

9 CSA-51001.4 Mechanical Dimensions 1.4.1 Dimensions Dimensions in mm 465 482.60 44 31.75 10.30 458.80 4407