MilSystemTM User’s GuideP/N 50-1Z028-1000 Revision 1.0
MilSystem Setup6 User’s Guide MilSystemSetup StepsFollow the setup steps in this section in the order listed. Skip any steps that do not apply to your
MilSystem SetupMilSystem User’s Guide 7Figure 2. Top View of Enclosure with Mounting DimensionsInstalling Mounting Hardware6) Install mounting scre
MilSystem Setup8 User’s Guide MilSystemFigure 3. Flat View of MilSystem I/O PanelConnecting Peripherals7) Connect the MC-1 cable to the MilSystem.
MilSystem SetupMilSystem User’s Guide 9Table 6. I/O Panel Connectors (Refer to Figure 3 for connector locations.) MC (Military Connector) Pin D
MilSystem Setup10 User’s Guide MilSystem15 Ethernet 3 MDI1_P Ethernet1 Positive16 Ethernet 4 MDI2_P Ethernet2 Positive17 Ethernet 5 MDI2_N Ethernet2 N
MilSystem SetupMilSystem User’s Guide 11*Supported only on MilSystem 735**Supported only on MilSystem 840***Supported only on MilSystems 735 and 840 4
MilSystem Setup12 User’s Guide MilSystem18 Serial 1 1 DCD1 Indicates external serial device is detecting a carrier signal.19 Serial 1 2 RXD1 Receive D
MilSystem SetupMilSystem User’s Guide 13 45 Serial 4 1 DCD4 Indicates external serial device is detecting a carrier signal.46 Serial 4 2 RXD4 Receive
MilSystem Setup14 User’s Guide MilSystem13 Parallel 13 SLCT Select - indicates the printer is selected and powered on if the signal state is High.14 P
MilSystem SetupMilSystem User’s Guide 15*Requires external display power supply and display power inverter.37 LVDS 12 LVDS_IYBM1 Channel 2, line 1, da
Notice PageDISCLAIMER ADLINK Technology, Incorporated makes no representations or warranties with respect to the contents of this manual or of the ass
MilSystem Setup16 User’s Guide MilSystemApplying Power to the MilSystem8) Follow these steps to apply power to the MilSystem.• Connect the AC Mating C
MilSystem User’s Guide 17Appendix A Technical SupportADLINK Technology, Inc. provides a number of methods for contacting Technical Support listed in t
Appendix A Technical Support18 User’s Guide MilSystemTable A-1. Technical Support Contact Information (Continued)ADLINK Technology Shanghai Address:
MilSystem User’s Guide 19Appendix B Physical DimensionsFigure B-1 shows the MilSystem enclosure dimensions. Figure B-1. Width, Depth, and Height Me
Appendix B Physical Dimensions20 User’s Guide MilSystem
MilSystem User’s Guide iiiContentsMilSystem Setup ...
Contentsiv User’s Guide MilSystem
MilSystem User’s Guide 1MilSystem SetupAbout the MilSystemThe MilSystem products are intended for users of turn-key embedded systems who require long
MilSystem Setup2 User’s Guide MilSystemDevice/Peripheral Connections• Ethernet (LAN) connection• USB device connections• Up to two PC/104 expansion mo
MilSystem SetupMilSystem User’s Guide 3Table 2 lists the current draw values of the MilSystem with the COM 840 and the EBX Baseboard. Op
MilSystem Setup4 User’s Guide MilSystemTable 3 lists the current draw values of the MilSystem with the LittleBoard 800. Operating configuration
MilSystem SetupMilSystem User’s Guide 5What’s in the Box The Contents List identifies the items in the shipping box for the MilSystem Unit and the Mil
Commentaires sur ces manuels